Grind-Loc Components

If you can fit loc-line, you can fit Grind-Loc. 

This modular hose system is based on 2 different internal diameters, 1/2” and 1/4”, and can withstand 100psi by using external element clamps and hard plumbing. This system is based on the same ball size as Loc-Line (fully interchangeable), uses coherent jet nozzles that swivel +/- 30 degrees, can telescope to different lengths without removing segments, and has low internal turbulence due to the lower flowrate from the smaller coherent-jet nozzles. Standard flat nozzle jet exit apertures are 0.63″ x 0.05″ for the 1/2″ system and 0.38″ x 0.05″ for the 1/4″ system. Standard round nozzle exit diameter is 0.187″ for 1/2″ system and 0.125 for the 1/4″ system.The numbers shown after 12 or 14 in the part number indicate the exit aperture.