Cost Savings with Cool-Grind
1. YOU WILL CONSUME FAR FEWER GRINDING WHEELS PER YEAR
$7K INVESTMENT RETURNS $2.7 MILLION IN FIRST YEAR
“The estimated cost savings for the grinding wheels is $2,700,000. This was achieved by improving the coolant flow...”- Orthopedic Implant Manufacturer
Warsaw, Indiana
2. IMPROVE SURFACE FINISH AND REDUCE THERMAL DAMAGE IN THE FINAL SURFACE 
$1K INVESTMENT RESULTS IN $100,000 SAVINGS PER YEAR
“With Cool-Grind nozzle, the surface finish required for a rod end ball bearing was achieved by just using the grinding process. By removing the 30 seconds of cleaning time, this company saved an estimated $100,000 a year”- Aircraft Rod-End Bearing Manufacturer
Hartford, Connecticut
3. GREATER PRODUCTION THROUGHPUT INCREASES YOUR CAPACITY
“A customer sets his machine overnight, using automated part loader, to grind 20 weldon flats on 0.50” diameter end mills, before reaching the point were the wheel needs to be stick dressed. With Grind-Loc nozzles they can run 80 parts overnight, increase productivity by 400%.”
- Carbide Endmill Manufacturer
Ontario, Canada
- Carbide Endmill Manufacturer
Ontario, Canada
4. GREATER DRESSING TOOL LIFE AND LESS TIME LOST DUE TO DRESSING
$2,500 INVESTMENT REDUCES NON-PRODUCTIVE CYCLE BY 700%
“With Cool-Grind nozzles productivity jumped and grinding ratios went from 1 part = 1 dress to an astonishing 7 parts = 1 dress.”- Bearing Manufacturer
St. Thomas, Ontario